ONE SOLUTION

MasterTAP’s was designed for high-performance tapping a wide range of materials such as steel, stainless steel, cast iron, non-ferrous metals, heat-resistant alloys and titanium alloys.

Threading may be performed both on modern efficient machining centers with high cutting speeds, older type numerical machines and conventional machines with a slightly lower performance. The most important taps design feature is the combination of innovative solutions in the area of tools stereometry and micro-geometry also the use of innovative nano-structured PVD coatings.

The combination of these features makes the tool universal, lets you work with high cutting speeds, ensures excellent surface quality and dimensional accuracy of made threads threads.

If you want to improve thread quality and increase tap life we recommend tap holders

INNOVATIONS

ONE SOLUTION

Made of HSSE-PM – high-speed powder steel

Innovative geometry and micro-geometry of cutting edges for working with wide range of materials

The multi-layer coating based on TiAlN + WC / C with extra hardness and extremaly smooth surface

POWDERED STEEL
SPECIAL MICRO-GEOMETRY OF CUTTING EDGE
MULTI-LAYER HARD MATERIAL COATING

YOUR ADVANTAGES

What will you gain by using MasterTAP's

One tool for working with wide range of materials
The longest tool life in comparison with other products on the market
Machining with increased cutting speeds
The best quality of machined surfaces
Guarantied optimum chip evacuation
High level of process reliability
The possibility of wet and MQL (Minimum Quantity Lubrication) working

THE APPLICATION

Tapping a wide range of materials such as steel, stainless steel, cast iron, non-ferrous metals, heat-resistant alloys and titanium alloys.

ONE SOLUTION

• For ISO material groups

P
– steels
M
– stainless steels
K
– cast iron
N
– non-ferrous materials
S
– heat-resistant alloys and

• For use in engineering, automotive, aerospace, energy industries

VARIANTS

Tailored to your needs

B –FormB chamfer (4-5xP) with spiral point, for through holes

MasterTap

B-IKR – FormB chamfer (4-5xP) with spiral point, for through holes with internal coolant for longer tool life and better chip evacuation
MasterTap

C-R45 – FormC chamfer (2-3xP) with spiral flutes with an angle of 45˚, for blind holes

MasterTap

E-R45 – FormE chamfer (1,5-2xP) with spiral flutes with an angle of 45˚, for blind holes and threading almost the entire length of the hole

MasterTap

E-R45-IK – FormE chamfer (1,5-2xP) with spiral flutes with an angle of 45˚, for blind holes and threading almost the entire length of the hole with internal coolant for longer tool life and better chip evacuation

MasterTap

Contact

We invite you to submit queries

ONE SOLUTION

Fabryka Narzędzi FANAR S.A.
ul. Płocka 11
06-400 Ciechanów
tel. (48 23) 672 44 41, 674 30 00
fax. (48 23) 672 48 41, 672 23 31
info@fanar.pl

Export Department
+48 23 674 30 03
+48 23 674 30 35
export@fanar.pl